Tips for Maintaining Your Boiler


The boiler is a common household appliance that uses either gas, electricity or oil as fuel to boil water. Hot water is a virtual necessity in houses all over the world, especially in places where the temperature dips sharply during the winters. In the UK, many people keep their boilers running throughout the year, as the refreshing feeling of a hot water bath is something that you just can’t replicate! Hot water opens the pores on your skin and rejuvenates your body considerably, making you feel fresher and much better! A hot water bath after a long day at work is just what you need to let go of all your tiredness, after all.

However, you should know that the boiler requires a considerable amount of maintenance if you want to keep it running smoothly. If you don’t maintain your boiler properly or pay attention to the noises coming out of it, it won’t be long before it stops running altogether. Here are a few basic tips for keeping your boiler running smoothly throughout the year.

Get an Annual Service Done

First and foremost, you need to have a service performed on your boiler at least once a year. You can call a Gas Safe engineer in West London for boiler service. This will ensure that your boiler is not only running smoothly, but also efficiently. The engineer will carefully check each and every component of the boiler and make sure that everything is in the right place. Since most people subject their boilers to heavy use during the autumn and winter months, you should ideally schedule the service sometime in September.

Bleed the Radiators

When you turn on your boiler after a long while, let it run for a bit of time. After a while, you may begin to notice that the radiator doesn’t heat up immediately. That is because there’s a significant amount of air trapped within the radiator. A simple way to figure this out is to check the radiator from the bottom; there is air inside if the radiator is hot at the bottom and cold near the top. Make sure you bleed the radiator and then check the pressure gauge later, as pressure is likely to drop after you bleed it.

Don’t Tinker with It Too Much

There are a number of common radiator problems that can occur, such as the radiator ceasing to work, the radiator remaining hot at the top but not at the bottom, and more. Ideally, you should call in a Gas Safe engineer to fix the issue rather than tinkering with it all by yourself. Unless you are experienced with working on boilers and know what you are doing, it is generally a bad idea to try to tinker with the device by yourself. You could just end up causing more problems than you intended to fix, so why not let a professional do the job? These are just a few basic tips that will help you keep your boiler running without a hitch!

Leave A Reply